Document Type : Research Paper
Authors
1 Department of Clinical Laboratories, College of Applied Medical Sciences, University of Kerbala, Kerbala, Iraq.
2 Department of Chemistry, College of Science, University of Kerbala, Kerbala 56001, Iraq
Abstract
Keywords
INTRODUCTION
The development of numerous unique functional and smart materials is dependent on the development of a particular class of nanomaterials [1-3]. Because of their unique physical and chemical properties, the transition metal oxide (TMO)-based nanomaterials have been attracting a lot of attention [4-6]. Till now, these nanostructures have been applied for a variety of industrial applications. High specific surface area, higher surface energy and quantum confinement are responsible for the attractive physical and chemical properties in TMO nanomaterials [7-9]. Since these features are vast pauper on the size and shape of nanoparticles, it is essential to apply a suitable method for preparation TMO nanostructures with desired shape and morphology [10-12]. So, various metal oxide nanostructures with different properties have been prepared and applied in various fields [13-16].
Because of its intriguing features as a p-type semiconductor with a narrow band gap and as the basis of various high-temperature superconductors, cupric oxide (CuO) has been found more attention in TMO research [17-19]. CuO nanomaterials with high surface-to-volume ratio, and potential size effects have excellent chemical and physical features that are vastly different from those of their micro or bulk counterparts [20, 21]. The promising applications of these nanostructures have been thoroughly explored. CuO nanomaterials have attractive structural properties that make them an ideal platform for the composite construction with various components to improve its different photocatalytic and bio-related application. So, the binary design of CuO nanomaterials mixed with inorganic nanostructures is the most popular choice used for preparation of effective nanocomposites [22, 23]. Cerium dioxide, CeO2 has received a lot of interest in recent years due to its widespread availability and high potential of catalyst-based application. CeO2 has a large oxygen storage capacity, abundant oxygen vacancies, and the ability to flip between Ce3+ and Ce4+ with ease [24-26].
Jianyu Yun et al. prepared CuO/CeO2 nanocomposites using the non-equilibrium plasma, and then comparing with the traditional calcination. Results revealed that the treatment of non-equilibrium plasma after calcination can considerably improve the synergism effect between the CuO active phase and the CeO2 support, which leading to good dispersion of CuO. They applied CuO/CeO2 nanocomposites as an effective catalyst for toluene oxidation [27].
Weiwei Jie et al. prepared the 1D cerium oxide nanotubes, nanowires, and nanorods via hydrothermal route and supported CuO for CO preferential oxidation. They characterized the products via XRD and TEM analysis. It is found that CuO/CeO2 nanotubes had the highest CO oxidation activity [28].
In this work, the CuO/CeO2 nanocomposite was synthesized via simple and novel hydrothermal route. The prepared sample was characterized to prove synthesis it via using different techniques such as XRD, SEM, EDX, FTIR, and TGA. The results showed that prepared CuO/CeO2 nanocomposites can be applied in different applications.
MATERIALS AND METHODS
Chemicals and instruments
All chemicals were of synthesis grade, obtained from Scharlau, and used without extra purification. Nanoscale composites were characterized by Philips-X’ pertpro X-ray diffraction analysis that employing Ni-filtered Cu Kα radiation. Also, the FT-IR spectra was carried out for solid sample using KBr pellets, Nicolet Magna 550 FT-IR spectrometer. The morphological engineering and particle size for prepared sample were detected using LEO-1455VP Field-Emission scanning electron microscopy with an energy dispersive X ray spectroscopy.
Preparation of CuO nanoparticles (CuO NPs)
0.5 g CuSO4.2H2O was added to 50 mL DI water under stirrer conditions. After, as-prepared sodium hydroxide solution (10 M) were added. The obtained mixture was moved to a Teflon-lined stainless steel autoclave and heated at 150 °C for 10 h. The final product was filtered, washed with ethanol, and dried at 65 °C.
Preparation of CeO2 nanoparticles (CeO2 NPs)
Firstly, 0.6 g Ce(SO4)2.4H2O in 50 mL DI water were completely dissolved at 50 °C. Next, sodium hydroxide solution (10 M) were added into above solution. After that, the mixture was put into a Teflon-lined stainless steel autoclave and heated at 150 °C for 12 h. the resultant powder was filtered, washed with ethanol, and dried at 65 °C.
Preparation of CuO/CeO2 nanocomposites (CuO/CeO2 NCs)
The nanoscale CuO/CeO2 composites was prepared as following: Initially, CuSO4.2H2O and Ce(SO4)2.4H2O were dissolved completely in DI water (25 mL) at room temperature. Under continuous stirring, the as-prepared sodium hydroxide solution (10 M) was added drop by drop to above solution. After that, the mixture was stirred at 25 °C for 10 min. Then, the mixture was transferred to a Teflon-lined stainless steel autoclave and kept under hydrothermal conditions (150 °C, 12 h). After the completion of the reaction time, the dark solid was brought to ambient temperature, filtered, washed with ethanol, and dried at 65 °C. The product was finally calcined at 600 °C for 2 h.
RESULT AND DISCUSSION
The identification of composition structure was confirmed by XRD technique. Fig. 1a shows the XRD graph of the pure CuO NPs. The position and intensity ratio of these peaks have acceptable to reference pattern (JCPDS= 01-089-2529)[29]. Besides, CuO NPs Miller’s index is seen. According to the Debye-Scherrer equation (D= kλ/βcosθ)[30-32], the crystallite size was calculated approximately 48 nm. Today, many papers have been published about XRD patterns of the CeO2 NPs. The obtained XRD patterns of CeO2 NPs (JCPDS= 00-034-0394) in this study is totally in agreement with previous report [33]. The number of clear diffraction and peaks of CeO2 NPs are observed in Fig. 1b. The CeO2 crystallite size, which is measured by the Debye equation, was reported 38 nm. Almost all Miller peaks of pure CuO and CeO2 NPs are displayed in final XRD patterns and the 2θ of CeO2 elevate when CuO incorporated with the crystal lattice of CeO2 by metal-metal bond that same results which reported in reports [34,35] (Fig. 1c). Accordingly, the CuO/CeO2 NCs have been successfully fabricated as nano-composite with the crystallite size about 56 nm.
The surface functional group was studied by FT-IR test. Fig. 2 shows the FT-IR spectrum of CuO/CeO2 NCs synthesized by hydrothermal route. As showed peaks in 3430 cm-1 and 1655 cm-1 are related to hydroxyl group stretching and bending absorption of water, respectively, which similar the position of water OH in metal oxides[36,37]. Also, the peaks at 650 cm-1 and 590 cm-1 correspond to Ce-O and Cu-O, respectively that attitude to the reduced mass for Cu-O is less than value for Ce-O, and the wave number is more for Ce-O.
The purity of CuO/CeO2 NCs was confirmed by EDX analysis in Fig. 3. In this analysis, cerium, copper, and oxygen are the main elements. This test could be concluded that the CuO/CeO2 NCs are formed without any impurity, and the summation of atoms equal to 100%.
The morphological property of CuO/CeO2 NCs was found by using FE-SEM spectroscopy ( Fig. 4). Based on FE-SEM images, it can be understood that CuO and CeO2 nanoparticles have been gone together as a semi-spherical plate.
Also, the magnetization attributes of CuO/CeO2 NCs was determined with the help of a VSM analysis (Fig. 5). Data display that the magnetization amount was reported about 0.08 emu/g.
Based on Fig. 6, the thermogravimetric analysis was applied to find the thermal stability of the CuO/CeO2 NCs. This nanocomposite reveals a suitable thermal stability without a significant decline in CuO/CeO2 NCs weight. The weight loss about (2%) at temperatures below 180 ˚C is owing to the removal of physically adsorbed solvent and surface hydroxyl groups. Rising temperature up to 800 ˚C is related to decompose of nanocomposites structure.
The photocatalytic activity of prepared CuO/CeO2 nanocomposites was studied toward acid violet 7 and rhodamine B under UV irradiation using % Efficiency=[(1-Cdye,t)/ =[(1-Cdye,0)] x 100 when Cdye,o is the initial concentration of dye at t zero (dark reaction), and at t time of reaction Cdye,t is a concentration of the same studied dye [37-40] at wavelengths 517 nm and 510 nm for acid violet 7 and rhodamine B, respectively.
The Fig. 7 shows % of photo-degradation efficiency of acid violet 7 and rhodamine B after 120 min. As well as shown, the 95.8 % and 88.2% of acid violet 7 and rhodamine B was photodecolorization after 120 min irradiation. This excellent function can be attributed to the synergism between CuO and CeO2 nanostructures.
The possible mechanism can be provided for photodegradation of any dyes [41-44] such as (acid violet 7 and rhodamine B) in presence of photocatalyst:
CONCLUSION
In conclusion, the CuO/CeO2 nanocomposite was synthesized via in-situ hydrothermal route. The prepared products were characterized via XRD, SEM, FTIR, VSM, VSM and TGA analysis. The characterization techniques confirmed the formation of the CuO/CeO2 nanocomposites with any impurity. Morphological investigation revealed semi-spherical plate morphology of CuO and CeO2 in linking together. The prepared semiconductor nanocomposites were applied for photodegradation of acid violet and rhodamine B under ultraviolet irradiation. The results showed the excellent photocatalytic performance of prepared CuO/CeO2 nanocomposites that beyond to improve the surface properties for CuO and CeO2 such as increased the acidity of surface, depressed the recombination after formed their nanocomposite. It was found that 95.8 and 88.2% of acid violet 7 and rhodamine B was removed through treatment via CuO/CeO2 nanocomposites. The provided mechanism showed that the free hydroxyl radicals are the responsible for photocatalytic activity of CuO/CeO2 nanocomposites.
CONFLICT OF INTEREST
The authors declare that there is no conflict of interests regarding the publication of this manuscript.