Deposition of Al/Cu Multilayer By Double Targets Cylindrical DC Magnetron Sputtering System

Document Type : Research Paper

Authors

1 Radiation application Research School, Nuclear Science &Technology Research Institute (NSTRI), Atomic Energy Organization of Iran (AEOI), P.O.Box :31485-495 ,Karaj, Iran

2 Department of physics, University of Kashan, Kashan, P. O. Box. 87317–51167, Iran

10.7508/jns.2013.04.009

Abstract

A cylindrical direct current magnetron sputtering coater with two targets for deposition of multilayer thin films and cermet solar selective surfaces has been constructed. The substrate holder was able to rotate around the target for obtaining the uniform layer and separated multilayer phases. The Al/ Cu multilayer film was deposited on the glass substrate at the following conditions: Working gas = Pure argon, Working pressure = 1 Pa, Cathode current = 8 A and cathode voltage = -600 V .Microstructure of the film was investigated by X-Ray Diffraction and the scanning electron microscopy analyses. The elements profile was determined by glow discharge–optical emission spectroscopy analysis. During deposition, both targets with magnetron configuration were sputtered simultaneously by argon ions. A Plasma column on the targets surface was generated by a 290 G permanent magnet unit. Two DC power supply units with three phases input and maximum output of 12 A/1000V were used to deposit the multilayer thin films. A control phase system was used to adjust output voltage.

Keywords


[1] Z. Zhang, Elaboration of Nano-composite Coatings using Sputtering Processes with Application to the Substitution of Electrolytic Cr Coating”, PhD thesis, Université de Technologie de Belfort-Montbéliard, (2008).
[2] T. T. Huang, H. Y. Xu, Z. Z. Liu, U. S. Patent 0264199 A1 (2013).
[3] T. Nyberg, S. Berg, U. S. Patent US7465378 B2 (2008).
[4] A. Anders, Surf. Coat. Technol. 205, S1 (2011).
[5] J. Lin, J. J. Moore, W. D. Sproul, B. Mishra, J. A. Rees, Z. Wu, R. Chistyakov, B. Abraham, Surf. Coat. Technol. 203 (2009) 3676-3679.
[6] P. J. Kelly, P. S. Henderson, R. D. Arnell, G. A. Roche, D. Carter, J. Vac. Sci. Technol. A 18 (2000) 2890-2895.
[7] U. Helmersson, M. Lattemann, J. Alami, J. Bohlmark, A. P. Ehiasarian, J. T. Gudmundsson, 48th Annual Technical Conference Proceedings, Denver, CO, 23–28, A (Society of Vacuum Coaters, Albuquerque, NM) ( 2005) 458–464.
[8] J. T. Gudmundsson, Vacuum, 84 (2010) 1360-1365.
[9] D. Peijun, T. Rong, X. Zheng, U. S. Patent, 6875321 (2005).
[10] T. Tepman, U. S. Patent  6881310 (2005).
[11]  Jr.  Hawton,    J.  T.  Shumate, G.  William, U. S. Patent  4179351 (1979).
[12] A. A. Solovev, N. S. Sochugov, K. V. Oskomov, S. V. Rabotkin, Plasma Phys. Rep. 35, 399 (2009).
[13] A. S.  Penfold, A. S. Thornton, U. S. Patent 399587 (1977).
[14] N. Kuriyama, U. S. Patent  4221652 (1980).
[15] N. Kuriyama, U. S. Patent  5178743 (1993).
[16] M. A. Lieberman, A. J. Lichtenberg, Principles of Plasma Discharges and Materials Processing, second Edition, New York, 2005.
[17] K. K. Tezatzov, A. S. Gorodetsky, U. S. Patent  6436252 (2002).
[18] A. V. Kozyrev, N. S. Sochugov, K. V. Oskomov, A. N. Zakharov, A.N. Odivanova, Plasma Phys. Rep. 37 (2011) 621-625.
[19] S. J. Nadel, P. Greene, J. Rietzel, J. Str¨umpfel, Thin Solid Films, 442 (2003) 11-17.
[20] J. Krempel-Hesse, A. Kloeppel, M. Hanika, in Proceedings of the 10th International Symposium on Sputtering and Plasma Processes (ISSP). Kanazawa, Japan (2009).
[21] S. Sultana, “RF Magnetron Sputtering system Make: Anelva Sputtering Unit Model SPF-332H Centre for Excellence in Nano-Electronics Indian Institute of Science”, Bangalore(2010).
[22] D. J. Gennardo, “Design, construction and optimization of a magnetron sputtering system for urania deposition”, Master of Science thesis, University of Illinois at Urbana-Champaign, 2010.
[23] L. Phillips, K. Macha, A.-M. Valente-Feliciano, Proceedings of SRF(2013), Paris, France, ISBN 978-3-95450-143-4.
[24] H. Hidalgo, A.-L. Thomann, T. Lecas, J. Vulliet, K. Wittmann-Teneze, D. Damiani, E. Millon, P. Brault, Fuel Cells (2012) sous presse" DOI:10.1002/fuce.201200125.
[25] Z. Xuyang, W. Aimin, Q. Wenchao, J. Xin, Rare. Metal, 31 (2012) 178-182.
[26] M. Alizadeh, M. Samiei, Mater. Design, 56 (2014) 680–684.
[27] T. Duguet, S. Kenzari, J. Mater. Res, 25 (2010) 764-772.
[28] M. A. Issa, M. A. Issa, M. S. Islam, A. Chudnovsky, Eng. Frac. Mechan. 70 (2003) 125–137.