[1] Saito R, DresselhausG, Dresselhaus M S. Physical Properties of Carbon Nanotubes. Imperial College Press: London; 1998.
[2] Qian D, Wagner G J, Liu W K, Yu M F and Ruoff R S. Mechanics of Carbon Nanotubes. Appl Mech Rev 2002; 55(6): 495–533.
[3] Ajayan PM, Stephan O, Colliex C, Trauth D. Aligned carbon nanotube arrays formed by cutting a polymer resin—nanotube composite. Science 1994; 256: 1212–4.
[4] LourieO, Cox D M, Wagner H D. Buckling and Collapse of Embedded Carbon Nanotube.Phys Rev Lett 1998; 81(8): 1638–41.
[5] Haggenmueller R, Gommans H H, Rinzler A G, Fischer J E, Winey K I. AlignedSingle-Wall Carbon Nanotubes In Composites by Melt Processing Methods. Chem Phys Lett 2000; 330: 219–25.
[6] Fidelus J D, Wiesel E, Gojny F H, Schulte K,Wagner H D. Thermo-mechanical properties of randomly oriented Carbon/epoxy nanocomposites. Compos Part A: Appl Sci Manufact 2005; 36:1555–61.
[7] Bonnet P, Sireude D, Garnier B, Chauvet O. Thermal properties and percolation in carbon nanotube–polymer composites. J Appl Phys 2007; 91: 201910.
[8] Qian D, Dickey E C, AndrewsR, Rantell T. Load Transferand and Deformation Mechanisms in Carbon Nanotube-Polystyrene Composites. Appl Phys Lett 2000; 76: 2868–70.
[9] Odegard GM, Gates T S, Wise K E, Park C, Siochi E J. Constitutive Modeling of Nanotube-Reinforced Polymer Composites. Compos Sci Technol 2002; 63(11): 1671–87.
[10] Wuite J, Adali S. Deflection and stress behaviour of nanocomposite reinforced beams using a multiscale analysis. Comps Struct 2005; 71:388–96.
[11] Vodenitcharova T, Zhang L C. Bending and local buckling of a nanocomposite beam reinforced by a single-walled carbon nanotube. Int J Solids Struct 2006; 43:3006–24.
[12] Han Y, Elliott J. Molecular dynamics simulations of the elastic properties of polymer/ carbon nanotube composites. Comput Mater Sci 2007; 39:315–23.
[13] Zhu R, Pan E, Roy AK. Molecular dynamics study of the stress–strain behavior of carbon-nanotube reinforced Epon 862 composites. Mater Sci Eng A 2007; 447: 51–7.
[14] Shen HS. Nonlinear bending of functionally graded carbon nanotubereinforced composite plates in thermal environments. Compos Struct 2009; 91:9–19.
[15] Ke L. L., Yang J., Kitipornchai S. Nonlinear free vibration of functionally graded carbon nanotube-reinforced composite beams. Compos Struct 2010; 92(3): 676-83.
[16] Wang X. Thermal shock in a hollow cylinder caused by rapid arbitrary heating. J Sound Vib 1995; 183: 899–906.
[17] Cho H, Kardomateas G A, Valle C S. Elastodynamic solution for the thermal shock stresses in an orthotropic thick cylindrical shell. J Appl Mech 1998; 65: 184–192.
[18] Ding H J, Wang H M, Chen W Q. A theoretical solution of cylindrically isotropic cylindrical tube for axisymmetric plane strain dynamic thermoelastic problem. Acta Mech Solida Sinica 2001; 14: 357–63.
[19] Pelletier J L, Vel S S. An exact solution for the steady-state thermoelastic response of functionally graded orthotropic cylindrical shells. Int J Solids Struct 2006; 43: 1131–58.
[20] Horgan C O, Chan A M. The pressurized hollow cylinder or disk problem for functionally graded isotropic linearly elastic materials. J Elasticity 1999; 55: 43–59.
[21] Tarn J Q. Exact solutions for functionally graded anisotropic cylinders subjected to thermal and mechanical loads. Int J Solids Struct 2001; 38: 8189–206.
[22] Abd-Alla A M, Farhan A M. Effect of the non-homogenity on the composite infinite cylinder of orthotropic material. Phys Lett A 2008; 372: 756–60.
[23] Shi D L, Feng X Q, Huang Y Y, Hwang K C, Gao H. The effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube –reinforced composites. J Eng Mater Technol 2004; 126: 250-7.
[24]Hill R. A Self- Consistent Mechanics of Composite Materials J Mech Phys Solids 1965; 13: 213–22.
[25] Popov VN, Van Doren V E, Balkanski M. Elastic Properties of Crystals of Single-Walled Carbon Nanotubes. Solid State Commun 2000; 114: 395–9.
[26] Mark J E. Polymer data handbook, Oxford University Press, New York. Oxford: 828-37, 1999.
[27] Hetnarski R B, Eslami M R. Thermal stresses advanced theory and application. Solid Mechanics; 2008.